The Gorilla Dual Temp Mini Glue Gun is an ideal tool for crafts and repairs. It is light weight, with a comfort grip and a built-in stand making it easy to use. The easy squeeze trigger and long insulated nozzle allow a precise application on whatever project you are working on.
1. Plug into 120V electrical outlet.
2. Insert 0.27” diameter mini glue stick into
back of glue gun through the feeder tube.
3. Allow glue gun to heat for approximately 5 minutes.
4. Squeeze trigger to dispense glue. More glue is dispensed by squeezing
trigger repeatedly. Continue glue flow by adding additional glue sticks. Note:
Requires approximately 2 glue sticks for initial start up.
5. Immediately press surfaces to be bonded together.
6. Do not pull glue sticks from glue gun. If changing glue, feed
remainder of glue stick through glue gun.
7. Unplug after use and allow glue gun to cool completely before storing.
Dual Temp Glue Gun: Use High Temperature for Wood, Plastic, Metal, Glass & more. Use Low Temperature for Floral, Fabric, Foam, Jewelry and more.
Troubleshooting:
Glue gun will not heat up: Make sure glue gun is plugged into a
120V electrical outlet. If glue gun still does not work, the internal fuse of
the glue gun may be blown and the glue gun is not repairable. Do not use.
Glue backs up at inlet tube: Glue sticks may be the wrong size. Use only the
recommended 0.27” diameter mini glue sticks. Note: Do not elevate front of glue
gun. Always use side stands or attached stand.
Caution:
Do not touch heated glue gun nozzle or melted glue; temperature can reach 380ºF . If accidental contact occurs, do not remove glue. Immediately put burned area into cold water. Always wear protective clothing, safety glasses, gloves, long sleeve shirt, and long pants. Keep away from flammable materials. Manufacturer assumes no responsibility for consequential or indirect damages from the use of this product.