Our most durable wood glue, this Ultimate formula is 100% waterproof and incredibly strong, but still easily cleans up with water. It is great for outdoor applications where temperatures or moisture might be a concern, as well as interior projects that could benefit from the extended working time and high strength.
Directions:
1. Clean and dry surfaces to be bonded.
2. Shake well before use.
3. Apply glue generously to the surface.
4. Join and clamp for 20-30 minutes. Parts should fit tightly.
5. Excess glue can be removed with a clean, wet cloth or
scraped off after glue dries.
6. Allow bond to dry for 24 hours.
7. Remove applicator tip to clean out glue build up.
NOTE: Application temperature should be at or above 50°F.
Before finishing, sand surfaces to minimize glue exposure.
Not recommended for structural or load bearing applications
and not for continuous submersion or below-waterline use.
Technical Specs:
Applications
Temperature: 50 – 75°F (10 – 24°C), best at room temperature
Service
Temperature: 0 – 150°F (-17 – 66°C)
Outdoor: Yes
Moisture
Resistant: Type I Waterproof
Paintable: Yes
Sandable: Yes
Stainable: Yes
Expands
when cured: No
Technical
Standards: ANSI/HPVA Type I
Storage Tips: Close cap after use. Store at room temperature.
If glue thickens or separates, shake vigorously until restored to original
consistency. STORE AWAY FROM CHILDREN AND ANIMALS.
Gap
Filling: No